User Manual

490
Vess R2000 Series Product Manual Promise Technologies
ViewiNg a list oF isCsi truNks (Clu)
A trunk is the aggregation of two or more iSCSI ports to increase bandwidth.
To view a list of iSCSI trunks:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
The list of iSCSI Trunks displays.
• ID–IDnumberofthetrunk.Startsat1.
• CtrlId–RAIDcontrollerID,1or2
• Master Port–OneofthefourphysicalportsontheRAIDcontroller
• Slave Ports–AnyoralloftheremainingphysicalportsonthesameRAIDcontroller
• Failed Ports–AslaveportthathasnoiSCSIdataconnection.
• State–Optimal,Sub-OptimalorFailed.IdentifyandcorrectthefailediSCSIports.
addiNg isCsi truNks (Clu)
Vess R2000 supports a maximum of eight trunks.
YoucannotuseaniSCSIportthathasportalsconguredtoit.See“Viewing a List of iSCSI Portals (CLU)” on
page 478 and “Deleting iSCSI Portals (CLU)” on page 482.
To add an iSCSI Trunk:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
3. Highlight Create New Trunk and press Enter.
4. Enter information as required:
• Highlight Controllerandtypethecontrolleryouwant(1or2).
• HighlightMaster Portandtypetheportnumberyouwant.
• HighlightSlave Portsandtypetheportnumberyouwant.
• HighlightTrunk type andusetheSpacebartotogglelacporbalance_xor.
Formultipleports,separatethenumberswithacomma.Youcanchooseanyorallport
numbersexcepttheMasterPortnumber.