User Manual

484
Vess R2000 Series Product Manual Promise Technologies
ViewiNg isCsi sessioN iNForMatioN (Clu)
To view a list of iSCSI sessions:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Sessions and press Enter.
3. Highlight the session you want and press Enter.
iSCSI session information includes:
• Session ID
–IDnumberofthesession
• Status–Activeorinactive
• Initiator Name–SCSIqualiedname(iqn)
• Portal IP–IPaddressoftheportal
• Device Type–Initiatorortarget
• Target Portal Group–IDnumber
• TSIH–Targetsessionidentifyinghandle
• Execution Throttle–Maxnumberof
outstandingcommandsonanyoneport
• Max Rcv Data Seg Length–Receivedata
segmentlength
• First Burst Length–Inbytes
• Default Time to Wait–Inseconds
• Immediate Data–Enabledordisabled
• Header Digest–Enabledordisabled
• CHAP Authentication Type –None,Local,
Peer
• Portal ID
–IDnumberoftheportal
• Target Alias
• Target Name
–iSCSIqualiedname(iqn)
• Initiator IP–IPaddressoftheinitiator
• Initiator Source Port–IDnumber
• ISID–InitiatorsessionIDnumber
• Max Outstanding R2T–NumberofPDUs
readytotransfer
• Max Burst Length–Inbytes
• Default Time to Retain–Inseconds
• Initial R2T–Enabledordisabled
• Data Digest –Enabledordisabled
• Data PDU in Order–Enabledordisabled
• Data Seq in Order–Enabledordisabled
• Device Access Control–Enabledordisabled