User Manual

480
Vess R2000 Series Product Manual Promise Technologies
addiNg isCsi portals (Clu)
Vess R2000 supports up to 32 iSCSI portals. Each iSCSI portal can belong to a different VLAN for a maximum
of 32 VLANs.
Ifyouplantoassociatethenewportalwithatrunk,createthetrunkrst.See “Adding iSCSI Trunks (CLU)” on
page 490.
FormoreinformationaboutiSCSIVLANs,see"iSCSIonaVLAN"onpage124.
To add an iSCSI portal:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Portals and press Enter.
The list of iSCSI Portals displays.
3. Highlight Create New Portal and press Enter.
4. Highlight AssociatedType and press the Spacebar to toggle through Physical, VLAN, and Trunk.
5. If you chose:
• PHY–ChooseaControllerID(1or2)andaPortID.
• Trunk–ChooseaTrunkID(1to8).
To change an ID number, highlight the item, press Backspace to delete the current ID and type a new
ID.
6. If you use Associated PHY, highlight EnableVLAN and press the Spacebar to toggle between Enable
and Disable. If you choose Enable, enter a Vlan Tag (1 to 4094).
To change a value, highlight the item, press Backspace to delete the current value and type a new
value.
7. Highlight Save Settings and press Enter.
The new Portal is added to the list.