User Manual

479
Product Manual Manage with CLU
ViewiNg isCsi portal iNForMatioN (Clu)
To view information for an iSCSI target port:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Portals and press Enter.
The list of portals appears.
3. Highlight the port you want to see and press Enter.
The portal information screen displays. Information includes:
• PortalID–Portalnumber.Startsat0.
• TcpPort–TCPportnumber.3260isthedefaultandrecommendednumber.
• DHCP–Enabledordisabled.*
DHCPiscurrentlysupportedonlyforIPv4.
• AssociatedType–PHY,VLAN,orTrunk.
• ControllerID –RAIDcontrollerID,1or2.
• PortID–PhysicalportontheRAIDcontroller
• InterfaceName–devicename.
• ProtocolFamily –IPv4orIPv6.*
• PrimaryIP–PrimaryIPaddressofthisportal.*
• Gateway -GatewayIPaddressofthisportal*
• PrimaryIPMask–Subnetmaskofthisportal.*
• AssignedTarget–0isthedefaulttarget.Thenumberoftargetsavailabledepends
onhowmanytargetsyoucreate.SeeAddingiSCSITargets(CLU)below.
Items marked with an asterisk (*) are adjustable under “Making iSCSI Portal Settings (CLU)” on page
481.