User Manual

476
Vess R2000 Series Product Manual Promise Technologies
• Enable NOP-In-EnabletocheckiSCSIconnectionstatus
6. Highlight Save Settings and press Enter.
7. Press Return to Previous Menu to return to the iSCSI targets list.
ViewiNg a list oF isCsi ports (Clu)
An iSCSI port is the physical iSCSI connection on the Vess R2000. There are four iSCSI ports on each RAID
controller for a total of eight per subsystem.
To view a list of iSCSI ports:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
The list of ports appears with controller and port numbers.
ViewiNg isCsi port iNForMatioN (Clu)
To view information for an iSCSI target port:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
The list of ports appears with controller and port numbers.
3. Highlight the port you want to see and press Enter.
The target port information screen displays. Information includes:
• CtrlId–ControllerID(1or2)
• JumboFrame–Jumboframes,enabledordisabled*
• LinkStatus–Linkstatus,upordown,ActiveorInactive
• MACAddress–MACaddressofthetargetport
• MaxSupportedSpeed–Maximumspeedsupported(1Gb/sor10Gb/s)
• CurrentSpeed–Currentoractualspeedofthetargetport
• RelativePortals–Theportalscorrespondingtothistargetport
Items marked with an asterisk (*) are adjustable under “Making iSCSI Port Settings” below.