User Manual

470
Vess R2000 Series Product Manual Promise Technologies
ViewiNg sFp iNForMatioN (Clu)
To view information about the SFPs (small form-factor pluggable transceivers):
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
3. Highlight the port you want and press Enter.
4. Highlight Fibre Channel Port SFP and press Enter.
The screen displays information about the SFP transceiver. There are no user settings on this screen.
ViewiNg Fibre ChaNNel port statistiCs (Clu)
To view port statistics:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
3. Highlight the port you want and press Enter.
4. Highlight Fibre Channel Port Statistics and press Enter.
This screen displays statistics for this port. There are no user settings on this screen.
cleAring stAtistics
To clear statistics, see “Clearing Statistics (CLU)” on page 521.
PrOPerty definitiOns
Denitionsofthepropertiesforwhichstatisticalinformationisreportedappearsinthelistbelow.
• TimeLastReset – Time in minutes since the system has been running.
•
FramesSent – Number of frames sent since last reset.
•
FramesReceived – Number of frames received since last reset.
•
WordsSent – Number of words sent since last reset.
•
WordsReceived – Number of words received since last reset.
•
LIPCount – Loop Initialization Primitive Sequence. This primitive sequence applies only to the arbitrated