User Manual

469
Product Manual Manage with CLU
The table below shows the type of attached topology you achieve based on your connection type and the
conguredtopologyyouchoose:
Fibre Channel Attached Topology
ConguredTopology
Connection Type N-Port NL-Port
Switch
FabricDirect PublicLoop
Direct Point-to-Point PrivateLoop
Example 1: If you connect the Vess R2000 to a Fibre Channel switch and choose NL-Port topology, you create
a Public Loop attached topology.
Example 2: If you have a Point to Point attached topology, you made a direct connection (no switch) and
chose N-port topology.
Note
In some cases, HBA settings to N-Port only work if connected to the switch.
Refer to your HBA manual for more information.
ViewiNg Fibre ChaNNel port statistiCs (Clu)
To view Fibre Channel port statistics:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
Highlight the port you want and press
Enter.
3. Highlight Fibre Channel Port Statistics and press Enter.