User Manual

468
Vess R2000 Series Product Manual Promise Technologies
ViewiNg Fibre ChaNNel logged-iN deViCes (Clu)
To view a list of logged-in devices:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
3. Highlight the port you want and press Enter.
4. Highlight Logged In Devices and press Enter.
If a Fibre Channel switch is attached, it also appears in this list.
MakiNg Fibre ChaNNel port settiNgs (Clu)
To make Fibre Channel port settings:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
3. Highlight the port you want and press Enter.
4. Highlight Fibre Channel Port Settings and press Enter.
5. Highlight the following parameters and press the spacebar to toggle though the choices:
• ConguredLinkSpeed–8Gb/s,4Gb/s,2Gb/s,orAutomaticselection
• ConguredTopology–NL-Port(ArbitratedLoop),N-Port
(PointtoPoint)orAutomaticselection
6. Highlight Hard ALPA and press the backspace key to erase the current value, then type the new value.
The range is 0 to 255. 255 disables this feature.
7. Press Control-A to save your settings.