User Manual

444
Vess R2000 Series Product Manual Promise Technologies
Step 3 – Summary
Review logical drives you are about to create for your new array. Then do one of the following actions:
•
Ifyouagreewiththe logicaldrivesasspecied,highlightComplete Disk Array Creation and press
Enter.
•
Ifyouspeciedlessthanthefullcapacityforthelogicaldriveinthepreviousscreen,andyouwanttoadd
another logical drive now, highlight Create New Logical Drive and press Enter.
• If you do not agree with the logical drives, highlight
Return to Previous Screen and press Enter to
begin the process again.
deletiNg a disk array (Clu)
Caution
When you delete a disk array, you delete all the logical drives and the
data they contain. Back up all important data before deleting a disk ar-
ray.
1. From the Main Menu, highlight Disk Array Management and press Enter.
2. Highlight the disk array you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
3. Highlight Delete Marked Arrays and press Enter.
4. PressYtoconrmthedeletion.
5. PressYagaintoreconrm.