User Manual

419
Product Manual Manage with CLU
MakiNg Ntp settiNgs (Clu)
After you have made Network Time Protocol (NTP) settings, the Vess R2000 subsystem synchronizes with a
NTP server.
• At startup
• Every night
• When you synchronize manually
To make NTP settings for the subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight NTP Settings and press Enter.
4. Make the following settings as required:
• HighlightNTP ServiceandpressthespacebartotogglebetweenEnabledandDisabled.
•
HighlightTime Server (1),Time Server (2),orTime Server (3)andtypeaservername.
Example: 0.us.pool.ntp.org
You can have up to 3 NTP servers.
• HighlightTime ZoneandpressthespacebartotogglethroughGMT,GMT+,andGMT-.
ForGMT+andGMT-,typethehourfrom0:00to13:00GMTforyourtimezone.
• HighlightDaylight Savings Timeandpressthespacebar
totogglebetweenEnableandDisable.
IfDaylightSavingsTimeisEnabled,highlighttheStart MonthandEnd Monthandenter
anumberfrom1to12.
ThenhighlighttheWeekandDayandtoggletomakeyourchoices.
5. Press Control-A to save your settings.
Notes
TheNTPservernameshownisanexampleonly.YoumustndandenteryourlocalNTPserver
name.
GMTistheolderdesignationforUTC.