User Manual

417
Product Manual Manage with CLU
ruNNiNg Media patrol (Clu)
Media Patrol is a routine maintenance procedure that checks the magnetic media on each disk drive. Media
Patrolchecksallphysicaldrivesassignedtodiskarraysandsparedrives.Itdoesnotcheckuncongureddrives.
To start, stop, pause or resume Media Patrol:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Media Patrol and press Enter.
3. Highlight Start, Stop, Pause, or Resume and press Enter.
4. If you chose Stop, press Ytoconrm.
loCkiNg or uNloCkiNg the subsysteM (Clu)
Thelockpreventsothersessions(includingsessionswiththesameuser)frommakingacongurationchange
to the controller until the lock expires or a forced unlock is done. When the user who locked the controller logs
out, the lock is automatically released.
setting the lOck
To set the lock:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Lock Management and press Enter.
3. IntheLockTimeeld,typealocktimeinminutes.
1440 minutes = 24 hours
4. Highlight Lock and press Enter.
resetting the lOck
To reset the lock with a new time:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Lock Management and press Enter.
3. IntheLockTimeeld,typealocktimeinminutes.