User Manual

416
Vess R2000 Series Product Manual Promise Technologies
MAnAgIng the SuBSySteM (clu)
Subsystem Management includes the following functions:
• “Making Subsystem Settings (CLU)” on page 416
• “Locking or Unlocking the Subsystem (CLU)” on page 417
• “Setting Subsystem Date and Time (CLU)” on page 419
• “Making NTP Settings (CLU)” on page 419
• “Synchronizing with a NTP Server (CLU)” on page 420
MakiNg subsysteM settiNgs (Clu)
An alias is optional. To set an Alias for this subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Subsystem Settings and press Enter.
3. Make changes as required:
• TypeandaliasintotheAliaseld.
Maximumof48characters.Useletters,numbers,spacebetweenwordsandunderscore.
• HighlightRedundancy Typeandpressthespacebarto
togglebetweenActive-ActiveandActive-Standby.
Active-Active–BothRAIDcontrollersareactiveandcansharetheload
Active-Standby–OneRAIDcontrollerisinstandbymodeandgoesactiveiftheotherfails
• HighlightCache Mirroringandpressthespacebarto
togglebetweenEnabledandDisabled.
4. Press Control-A to save your settings.