Manualshelf

User Manual

ManualsBrandsPromise Technology ManualsComputers2TB SAS Hard Drive with Carrier for the Vess R2000 Series NAS Device
441442443444445446447448449450
Table Of Contents
414
Vess R2000 Series Product Manual Promise Technologies
Quick Setup
– A sequence of four steps to setup system date and time, Management port, and RAID
conguration.See"Setting-upVessR2000withtheCLU"onpage68.
Subsystem Management
– Subsystem settings, Controller settings, statistics, lock/unlock the subsystem,
set date and time, Enclosure settings, FRUs and Topology.
Physical Drive Management
–Assignanalias,forceaphysicaldriveofineoronline,clearaStaleorPFD
condition, change global physical drive settings, and locate a physical drive.
Disk Array Management
– Assign an alias, view array information, create and delete disk arrays, transport,
rebuild, PDM, and transition functions, accept and incomplete array, locate a disk array, create, and delete logical
drives.
Spare Drive Management – View a list of spare drives, create, modify, and delete spare drives, and run Spare
Check.
Logical Drive Management
– Assign an alias, set cache policies, view logical drive information, run
initialization and Redundancy Check, create a LUN clone, and locate a logical drive.
Network Management
– Set IP addresses for Virtual and Maintenance Mode Ports, gateway, and DNS
server; subnet mask.
Fibre Channel Management
– Node information, Port information, settings, SFPs, and statistics, Logged-
in devices, add intiator to the list.
iSCSI Management
– Targets, Ports, Portals, Sessions, iSNS options, CHAPs, Ping, Trunks, Logged-in
devices, add initiator to the list.
Background Activities
– Summary of running and scheduled activity, settings for Media Patrol, Auto
Rebuild, Rebuild, Migration, PDM, Transition, Synchronization, Initialization, Redundancy Check rate, and
thresholds.
Event Viewer
– View runtime and NVRAM event logs.
Additional Info and Management
– LUN mapping, UPS management, User management, Software
services management, Flash through TFTP (Firmware update), Clear Statistics, Restore Default Settings,
Shutdown or Restart the subsystem.
Buzzer
– Enable, disable or silence the buzzer (audible alarm).