User Manual

411
Product Manual Manage with CLU
Then do the following actions:
1. Change your terminalemulationprogramsettingstomatchthefollowingspecications:
• Bitspersecond:115200
• Databits:8
• Parity:None
• Stopbits:1
• Flowcontrol:none
2. Start your PC’s terminal VT100 or ANSI emulation program.
3. Press Enter once to launch the CLI.
MakiNg a telNet CoNNeCtioN
A Telnet connection requires a network connection between the Host PC and the Management (Ethernet) port
on the Vess R2600 controller.
To start the telnet program:
1. Go to the command line prompt (Windows) or click the terminal icon (Linux).
2. Type telnet 10.0.0.1 and press Enter.
The IP address above is only an example.
Use the Management port IP address of your Vess R2600.
The Telnet default port number is 2300.
3. Press Enter once to launch the CLI.
Management port on the RAID controller