User Manual

401
Product Manual Managing with the CLI
lacp ThismodeisknownasDynamicLinkAggregationmode.Itcreates
 aggregationgroupsthatsharethesamespeedandduplex 
 settings.ThismoderequiresaswitchthatsupportsIEEE802.3ad
 Dynamiclink.
transit
Usage
transit[-a<action>][-d<DaId>][-s<SeqNo>]
transit-astart-d<DaId>-s<SeqNo>-p<PdId>
transit-astop-d<DaId>-s<SeqNo>
transit-apause-d<DaId>-s<SeqNo>
transit-aresume-d<DaId>-s<SeqNo>
Summary
The transit command starts, stops, pauses, and resumes a transition and monitors the
progress of a running transition.
Transition is an operation to replace a revertible spare drive currently used in a disk array
with an new physical drive, so the reveritible spare can be restored to spare drive status.
The destination drive can be an uncongured drive, a non- revertible global spare, or a non-
revertible spare dedicated to the array.
Examples
trunk -a add -s”ctrlid=1,masterport=2,slaveport=3 4”
trunk -a del -i 2