User Manual

400
Vess R2000 Series Product Manual Promise Technologies
trunk
Usage
trunk[-a<action>][-i<trunkid>]
trunk-aadd-s“<listofsettings>”
Summary
The trunk command is used to display and modify port trunk settings for the iSCSI host
interface.
Options
-a<action> Speciestheactiontoperform.
add Createanewtrunk.
mod Modifyanexistingtrunksetting.
del Deleteatrunk.
-i[<trunkid>] Porttrunkidentier.(1-8).
-s[“<option>=<value>”] Usedtospecifywhichtrunksettingstochange.
ctrlid= ControllerIDofPort
masterport= MasterportoftheTrunk.Range:PortID
slaveport= Listofportsaggregatedinthistrunk,excludingthemasterport
 Range:PortID.
trunktype= trunktype
balance_xor TransmitsbasedonXORformula.(SourceMACaddressisXOR’d
 withdestinationMACaddress)modulaslavecount. Thisselects
 thesameslaveforeachdestinationMACaddressand 
 providesloadbalancingandfaulttolerance.