User Manual

379
Product Manual Managing with the CLI
sas
Usage
sas[-a<action>][-t<Type>][-i<CtrlId>][-p<PortId>][-v]
sas-amod-t<Type>-i<CtrlId>-p<PortId>-s“<listofsettings>”
Summary
The sas command is used to view and modify SAS host port info and settings on SAS host
interface product only.
Options
-a<action> Whichactiontoperform.
list (Default)GivessummaryinformationaboutSAShostportstatus.
mod ModifySAShostportsettings.
clear Clearportstatisticsinformation.
-t<type> Specieswhattypeofinformationtodisplayormodify.
port (Default)SpeciesSAShostportasthedevicetypeto
 displayormodifyinformation.
stats Displayorclearportstatisticsinformation.
initiator Displayinitiatorlistconnectedtosubystem.
phystats DisplayPHYlevelstatisticsinformation.
-i<ctrlId> ControllerId.Defaulttobeallavailablecontrollersforlistingif-iis
 notspecied.Defaulttobecontroller1formodifyingif-iisnot
 specied.
-p<portid> Portnumber.Defaulttobeallportsif-pisnotspeciedwhen
 listing.
-s“<option>=<value>” SpeciesSAShostportsettingstochange.
cablesignalstrength