User Manual

375
Product Manual Managing with the CLI
-p<portnumber> SpeciestheportnumberoftheTFTPserver.Ifnoportnumberis
 given,thedefaultvaluethatwillbeusedis69.
-e<enclid> SpeciestheEnclosureID.     
 Onlyusedwith-aversioninfooption.    
 Ifnotspecied,defaultvalueisallenclosures.
-i<ctrlid> SpeciestheControllerID.     
 Onlyusedwith-aversioninfooption.    
 Enclosureidisrequiredwhencontrolleridisspecied. 
 Ifnotspecied,defaultvalueisallcontrollers.
-n Starttheashprocess/imageupdateinNDIUmode.  
 Thismodeisapplicableonlyifthesystemisinredundantstate.
 DefaultmodeofashisDIU(disruptive)mode.
-d<deviceid> SpeciesthephysicaldriveIDs.    
 Onlyforphysicaldrivermwareupdate.   
 Ifnotspecied,allthephysicaldrives,whicharesupportedbythe
 speciedphysicaldrivermware,areselected.
-l Displaythestatusofcurrentlyrunningashprocess.
-y Enablenon-interactivemode.
Examples
ptiash-t-s192.168.1.1-ffw_multi.ptif-p69#forembedded
ptiash-ffw_multi_20031010.ptif#forin-band
ptiash-l#listcurrentlyrunningashprocess
ptiash-t-s192.168.1.1-ffw_multi.ptif-n#forNDIUmode
ptiash-t-s192.168.1.1-fpd_fw.ptif-d1,2
#updatethepdrmwareforpd1and2usingthepd_fw.ptifimage.