User Manual

365
Product Manual Managing with the CLI
ntp
Usage
ntp[-a<action>]
ntp-alist
ntp-amod-s“<listofsettings>”
ntp-atest-t<timeserver>
ntp-async
Summary
The ntp command enables a user to view NTP status, add an NTP server, modify NTP
settings, test the NTP server connection, and synchronize subsystem time with the NTP
server.
Options
-a<action> Whichactiontoperform.
list (Default)DisplaysNTPinformation.
mod ChangethesettingsforNTP.
test Testtimeserver.
sync Synctimewithtimeserver.
-s“<option>=<value>” Usedtospecifywhatoptionstochange.
ntp= Enableanddisablentpservice.
enable
disable
Examples
net *shows a list of ip info for all network ports*
net -a enable -f ipv4
net-amod-m-c1-s“primaryip=10.0.0.2”
net-amod-fipv4-s“primaryip=192.168.1.10,primaryipmask=255.255.255.0”