User Manual

363
Product Manual Managing with the CLI
net
Usage
net[-a<action>][-f<protocolfamily>][-m][-v]
net-amod[-f<protocolfamily>][-m]
-s“<listofsettings>”
Summary
Net is used to display the TCP/IP specic information for the management port.
In addition to displaying IP address and subnet mask, changes to DHCP and DNS settings
can be changed. Most often this command will be used during initial setup to either setup a
static IP address or to display what DHCP assigned IP address the enclosure is using.
Options
-a<action> Whichactiontoperform.
list (Default)DisplaysalistofIPcongurations.
mod Tomodifycurrentnetworksettings.
enable ToenableIPv4/IPv6.
disable TodisableIPv4/IPv6.
-m Maintenancemode.
-c<ctrlID> SpeciesthecontrollerID.Whentheactionistomodifysetting
 and-cisnotspecied,thevalueisdefaulttobethecurrent 
 controllerid.Usedwith-mmaintenancemode.
-f<protocolfamily> Tospecifywhichprotocolfamilywillbemodied,enabledor
 disabled.
ipv4 (Default)IPv4.
ipv6 IPv6.