User Manual

343
Product Manual Managing with the CLI
fc
Usage
fc[-a<action>][-t<Type>][-i<CtrlId>][-p<PortId>][-v]
fc-amod-t<Type>-i<CtrlId>-p<PortId>-s“<listofsettings>”
Summary
The fc command is used to view and modify Fibre Channel information and settings.
Options
-a<action> Whichactiontoperform.
list (Default)GivessummaryinformationaboutFibreChannelstatus.
mod ModifyFibreChannelsettings.
reset ResetFibreChannelport(s)
-t<type> Specieswhattypeofinformationtodisplayormodify.
node DisplayFibreChannelnodeinformation.
port (Default)SpeciesFibreChannelportasthedevicetypeto
displayormodifyinformation.
SFP DisplayportSFP(SmallFormFactorPluggable)information.
stats Displayportstatisticsinformation.
device Displayportloggedindevicesinformation.
initiator Displayportloggedininitiatorsinformation.
-i<ctrlId> ControllerId.Defaulttobeallavailablecontrollersforlistingif-iis
 notspecied.Defaulttobecontroller1formodifyingif-iisnot
 specied.
-p<portid> PortId.Defaulttobeallportsforlistingif-pisnotspecied.
 Defaulttobeport1formodifyingif-pisnotspecied.
-s“<option>=<value>” SpeciesFibreChannelsettingstochange.