User Manual

341
Product Manual Managing with the CLI
factorydefaults
Usage
factorydefaults-a<action>-t<type>
Summary
The factorydefaults command restores specied settings to the factory default values.
Options
-a<action> Speciestheactiontoperform.
restore Restorethefactorydefaultsettings.
erase EraseiSCSIcongurations(usedalongwith<-tiscsi>).
-t<type> Speciesthetypeofsettingstorestore.
all Allsettings.
allfw Allrmwaresettings.
allsw Subsystemsonly.Allsoftwaresettings.
ThefollowingareindividualFirmwaresettings:
bga Backgroundactivitysettings.
ctrl Controllersettings.
encl Enclosuresettings,includingtemperaturethresholds,buzzer,etc.
fc fcportsettings.FibreChannelhostinterfaceproductonly.
iscsi iSCSIsettings,restoreoperationappliestoportandiSNS; 
 eraseoperationappliestoalliSCSIcomponents,includingtarget,
 portal,chap,trunk,etc.     
 iSCSIhostinterfaceproductonly.
netmgmt Subsystemsonly.Networksettingsofmanagementports.
phydrv Physicaldrivesettings.
sas SAShostinterfaceportsetting.SAShostinterfaceportproduct
 only.