User Manual

333
Product Manual Managing with the CLI
forcedreadahead= Enablesordisablesforcedreadaheadcaching.Forhigh 
 availabilityproductsonly.
enable
disable
powersavingidletime= AfteranHDDhasbeenidleforthesetperiodoftime,parksthe
 read/writeheads.Setthetimeintervalinnumberofminutes.Valid
 valuesare0(never),15,30,60(=1hour)..1440(=24hours).
powersavingstoppedtime= AfteranHDDhasbeenidleforthesetperiodoftime,Spinsdown
 thedisk(stopsrotation).Setthetimeintervalinnumberof 
 minutes.Validvaluesare0(never),15,30,60(=1hour)..1440(=24
 hours).
AdvancedBatteryFlashBackup= ToenableordisableAdvancedBatteryFlashBackup.
enable
disable
restoreacmode= RestoreonACPowerLoss.
alwayson
alwaysoff
laststate
appmode= TosetApplianceMode.
0 Genericmode
1 Surveillancemode
-t<conditiontype> Usedtospecifythetypeofconditiontoclear.
 Itisvalidonlywhenthecommandactionis“clear”.