User Manual

315
Product Manual Managing with the CLI
bga
Usage
bga[-a<action>]
bga-amod-s“<listofsettings>”
Summary
The bga command displays all current background activities and makes settings for each
background activity.
Options
-a<action> Speciestheactiontoperform.
list (Default)Listscurrentbackgroundactivities.
mod Makeschangestooneofthesettings.
-s“<option>=<value>” Specieswhichbackgroundactivitysettingstochange.
autorebuild= Enableordisableauto-rebuildandauto-transition.
enable Auto-rebuildinitiatesarebuildofanarraywhenanuncongured
 driveisinsertedintotheslotofadeaddrive.
disable Auto-transitionmeanstransitioningisinitiatedonausedrevertible
 spareinthefollowingcondition:
1. Whentherebuildhasbeencompletedusingtherevertiblespare,and
2. Whenanuncongureddriveisinsertedintotheslotofthedeaddrivewhichthewas
partofthearray.
or
Whenanon-revertiblesparehasbeeninsertedorcreated,andisapplicabletothearray
Thisoptionaffectsallarraysonthesubsystem.
enable
disable