User Manual

313
Product Manual Managing with the CLI
battery
Usage
battery[-a<action>][-b<batId>]
battery-arecondition-b<batId>
Summary
Battery is used to display the current status of a battery indicating the percentage of
charge left.
This command is also used to recondition a battery. Reconditioning of a battery attempts to
fully discharge, and then recharge it. In addition the battery will be reconditioned automatically
once per month.
-a<action> Whichactiontoperform.
list (Default)Listinformationforallbatteriesoraspecicbatteryunit.
recondition Reconditionaspecicbattery.
-b<batteryID> Usedtospecifywhichbatteryinagivenenclosure.
Examples
assn*showsalistofassociationofspeciedlogicaldrive*
assn -a add -t clone -l 0 -d 1 -r
assn -a del -l 0 -d 1
Examples
battery
battery -a recondition -b 1