User Manual

311
Product Manual Managing with the CLI
 withthe-alistoption.Forexample‘array-alist-c3’willgivea
 summaryfortherst3arraysonthatcontroller.
<Ldcount> Alsospeciesthenumberoflogicaldrivestobecreatedwhen
 usedwiththe-aaddoption.Ifthis-coptionisused,allthelogical
 driveswillbecreatedwiththesamesettingsandonlyone-lcan
bespecied.
-t<conditiontype> Specifythetypeofincompleteconditiontoaccept.Ifnotspecied,
 itwillacceptthecurrentincompleteconditionbydefault.
missingdrive Theconditionofmissingdriveinthearray.
missingwatermark TheconditionofmissingNVRAMwatermarkofthearray.
-v Verbosemode.Usedwith-alisttodisplayallpropertiesofthe
 givenarray.
Examples
array -v -c 1
array -a add -s “alias=MyArray,mediapatrol=enable” -p 1,3,5~9
-l “raid=5,capacity=50gb,stripe=256kb,sector=1kb”
array -a add -p 1,3,5~9 -l “raid=5,capacity=50gb,stripe=256kb”
-l “raid=0,capacity=100gb”
array -a mod -d 1 -s “alias=YourArray,mediapatrol=disable”
array -a del -d 3
array -a locate -d 0
array -a accept -d 2
array -a addld -d 0 -l “raid=1e,capacity=125gb,stripe=64kb”
array -a delld -l 1