User Manual

309
Product Manual Managing with the CLI
Raid= UsedtospecifytheRAIDlevelofthelogicaldrive.
0 Striping.
1 Mirroringontwodrives.
3 Parity,requiring3ormoredrives.
5 Parity,requiring3ormoredrives.
10 Mirroringonevennumberofdrives.
30 StripingonmultipleRAID3,requiring6ormoredrives.
1e Extendedmirroring,requiring2ormoredrives.
50 StripingonmultipleRAID5,requiring6ormoredrives.
6 Allowtwodrivefailure,requiring4ormoredrives.
60 StripingonmultipleRAID6,requiring8ormoredrives.
Capacity= Usedtospecifythedesiredcapacityofthelogicaldrive.Itcan
 bespeciedinmegabytes(mb),gigabytes(gb)orterabytes(tb).
 Upto2decimalplacesareallowedtobespecied.Ifnotspecied,
 allfreecapacitieswillbeusedforthislogicaldrive.
CapacityRounding= Enableordisablecapacityroundingforlogicaldrivecreation.
enable (Default)Enablecapacityrounding.
disable Disablecapacityrounding.
Stripe= Usedtospecifythestripesizeofthelogicaldrive.
 Thepossibleparametersare64KB,128KB,256KB,512KB,and
 1024KB.Ifnotspecied,thedefault64KBwillbeused.
Sector= Usedtospecifythedesirablesectorsizeofthelogicaldrive.The
 possibleparametersare512B,1KB,2KB,and4KB.Itmustnotbe
 greaterthantheStripesize.Itwillbeauto-adjustednottoexceed
 themaxsupportedsectorsizeofthecontroller,pleasesee 
 controllerinfoIfnotspecied,thedefault512Bwillbeused.