User Manual

303
Product Manual Managing with the CLI
Table of Supported Commands (Continued)
Command Action
sasdiag SASdiagnosticcommand.
sas
VieworeditSAShostinterfaceportinformationandsettings.SAShost
interfaceproductonly.
sc Viewsparecheckstatus.Startsparecheck.
scsi
VieworeditparallelSCSIinformationandsettings.ParallelSCSIhost
interfaceproductonly.
session Viewthelistofactivesessions.
shutdown Shutdownorrestartsystem.
smart S.M.A.R.Tdiagnosticforphysicaldrives.
spare Createormodifyhotsparedrives.
stats Vieworresetstatistics.
subscription View,modify,enableordisableeventnotication.
subsys Vieworeditsubsysteminformationandsettings.
swmgt View,startorstopsoftwarecomponent.
sync Viewlogicaldrivesynchronizationstatusandprogress.
topology
ViewSAStopology,thephysicalconnectionsanddeviceinformation.For
productsthatsupportmultipleenclosuresonly.
transit
Viewtransitionstatusandprogress.Start,stop,pause,orresumea
transitionprocess.
trunk View,modify,addordeleteporttrunkcongurationforiSCSIhostinterface.
ups ViewormodifyUPSinformationandstatus.
user List,modify,createanddeleteuseraccountsonsubsystem.
zoning List,modifySASzoningonsubsystem.
Note: Commands are NOT case sensitive.