User Manual

302
Vess R2000 Series Product Manual Promise Technologies
Table of Supported Commands (Continued)
Command Action
lunmap
ViewtheLUNmappingandmaskingtable.EnableordisableLUNmapping
andmaskingonFibreChannelhostinterfaceproduct.Add,deleteormodify
anLMMentry.
logdrv
Vieworeditlogicaldriveinformationandsettings.Locatealogicaldrivevia
LEDs.
logout
Logoutsessionforthecurrentuser.
maintenance Enterorexitmaintenancemode.
migrate Startandmonitordiskarraymigrationprocess.
mp
Viewmediapatrolstatusandprogress.Start,stop,pause,orresumemedia
patrol.
net
VieworeditEthernetnetworkinformationandsettings.
ntp VieworeditNTPstatusandsettings.
password Modifyauser’spassword.
pdm
ViewPDMstatusandprogress.Start,stop,pause,orresumePDM
process.
perfstats
Startandviewperformancestatisticsforcontrollers,logicaldrives,physical
drivesorports.
phydrv
Vieworeditphysicaldriveinformationandsettings.Locateaphysicaldrive
viaLEDs.
ping Pinganothersystemthroughmanagementport.
ptiash Updatesystemsoftwareandrmwarethroughtftpserver.
rc
Viewredundancycheckstatusandprogress.Start,stop,pauseorresume
redundancycheck.
rb
Viewrebuildstatusandprogress.Start,stop,pause,orresumearebuild
process.
Note: Commands are NOT case sensitive.