User Manual

285
Product Manual NAS Function and Management
For File Restore:
•
FileRestoresettingsaredependentuponthelebackuptask.
• IfthedestinationbackupShareDiskisonaremotesite,theremoteNASmust“allow”thelocalIP.See
“AllowIPforbackup”onpage278.
•
AllrestoredlesontheoriginalShareDiskareplacedinalenamedRestore,thetasknameanddate
versionareincludedinthelepath.
• Differential and compression transmission is supported.
To congure File Backup:
1. In NAS conguration: Backup > File Backup/Restore and click on the Create button.
Congure these settings:
• TaskName:EnteratasknamefortheFileBackupconguration.
• SourceShareDisk:SelectthesourceShareDiskfromthedrop-downmenu
• Direction:SelectFrom Local To Local orFrom Local To Remote fromdrop-down
menudependingonwhetherthebackupistoalocalorremoteShareDisk.
IfremoteShareDiskisthedestination,entertheIPaddressoftheRemote
BackupServerwherethebackupShareDiskislocatedandthePortalIPused.
• DestinationShareDisk:SelectthedestinationShareDiskfromthedrop-downmenu.
• Policy:Selectthebackuppolicytouse.
Mirror Mode:Synchronizealladded,modiedanddeletedles
Copy Mode:Onlysyncslesthatareaddedandmodiedles,withoutsyncing
deletedles
Version Mode:Createsanewfolderforsyncingallles.
2. Choose the Schedule to use for syncing the File Backup. NotethatthedefaultvalueDisablemeans
theBackupisdonemanually(seebelow).
3. Choose the number of Retry Times, the number of times to try again if the connection fails.
4. Click on the Next button.
5. Choose which les to backup.
6. Click the Save button to create the File Backup conguration.