User Manual

279
Product Manual NAS Function and Management
After the Allow IP list is created for a Share Disk, you can add or remove an IP address allowed for any Share
Disk on the list, or remove the Share Disk conguration and all the IP addresses on the associated Allow IP list.
•
ToaddanewIPaddresstotheAllowIPlistforaShareDiskbackupconguration,clickontheShare
Diskrowinthelist,clickontheSettingbutton,foreachIPaddressyouwanttoadd,typeintheIP
addressinthespaceprovidedandclicktheAddbutton.WhennishedaddingIPaddressestotheAllow
IPlist,clickontheApplybutton.
• ToremoveanindividualIPaddressfromaShareDiskAllowIPlist,clickontheShareDiskrowinthelist,
clickontheSettingbutton,andtheclickonthetrashcaniconfortheIPaddressyouwanttoremove.
• ToremoveanentireShareDiskbackupcongurationandalltheIPaddressesontheAllowIPlist,clickon
theDeletebuttonfortheShareDiskbackupconguration,thenclickontheConrmbuttonthatpopsup.
bAckuP server POrt settings
The administrator has the option of using the default port for backup, or specifying the port. The port has an
additional option of using encryption for the backup transmissions. Encryption is enabled on the client using the
Replication Backup menu (see “Replication Backup” on page 280). Use this menu only if you want to change the
default port setting used for backup. Keep in mind that the port change must also be made on the client using
the Replication Backup menu.
To change the backup port used for normal or encryption backups:
6. In NAS Conguration: Backup > Backup Server Settings
7. Click the Port Settings button.
8. Click on the Use Default option box to deselect it.
9. Type a number in the range 1025 to 65532 for the Encryption Port , and type a different number in the
same range for the
Normal Port .
10. Click the Apply button to change the backup port settings.