User Manual

278
Vess R2000 Series Product Manual Promise Technologies
BAckuP
Backup settings for the NAS are created and congured using the menus described below. Typically the backup
relationship is with another Vess R2000 remotely located and managed using these same menus.
•
BackupServerSettings
• ReplicationBackup
• ReplicationRecovery
• FileBackup/Restore
• ShareDiskClone
baCkup serVer settiNgs
The Backup Server Settings is used to designate remote systems that are allowed to backup on the Vess
R2000, and congure port settings for the backup via normal or encryption ports. Once the remote IP address is
allowed, the remote system, another Vess R2000 for example, can be congured for scheduled backups to this
Vess R2000. On the remote Vess R2000, you would use the Replication Backup menu to congure this backup
arrangement.
AllOw iP fOr bAckuP
To add a remote system allowed to backup to the Vess R2000, follow these steps:
1. In NAS conguration: Backup > Backup Server Settings
2. Click the Create button.
3. Type the IP address of the remote system allowed to backup and click the Add button.
4. For each system you want to add to the Allow IP list, repeat steps 2 and 3.
5. Click the Apply button to create the backup settings.