User Manual

265
Product Manual NAS Function and Management
rescAn disk POOl
After the complete Disk Pool (i.e. all the physical drives of the transported Disk Pool) has been installed on
the other Vess R2000 enclosure, it will be detected automatically. In order to begin using it however, one more
procedure remains, to Rescan the Disk Pool.
1. Go to the Disk Pool list , NAS conguration: File System > Disk Pool.
2. Notice there is now a button, Rescan, that appears above the list. Click on the Rescan button.
When the Disk Pool has been scanned, a
Success message appears. It is now ready for use.
iMPOrt nAs settings fOr trAnsPOrted disk POOl
Now that the Disk Pool has been physically installed and rescanned, you can apply the same settings for it from
the previous enclosure. To import NAS settings:
1. In NAS conguration: Misc and click the Backup/Restore Settings button.
2. Click on theImporttabandclickBrowsetolocatetheimpsettingsle.
3. ClicktheSubmitbuttonandthentheConrmbutton.Amessageappearsthatthesettings
havebeenchanged.TheDiskPoolshouldnowbefunctionallythesameasithadbeeninthe
enclosureitoccupiedpreviously.
Rescan transported Desk Pool