User Manual

263
Product Manual NAS Function and Management
creAte hOMe shAre disk
A single Home Share Disk can be created for the NAS. The Home Share Disk procedure is basically identical to
the Create Share Disk procedure described in the previous section.
User folders are available on the Home Share Disk when accessed via CIFS, FTP or AFP.
To create a Home Share Disk, follow these steps:
1. Click on the Create Home Share Disk button.
2. Choose the Disk Pool that will be used for the Share Disk from the pull-down menu, enter a name for
the Share Disk (optional), enter a value for the Capacity in GB (gigabytes) or TB (terabytes) to use for
the Share Disk; or click the option to
Use All Available Capacity to use the capacity remaining on the
Disk Pool.
3. Click to select what protocols will be used for the Share Disk. The available options are Windows
(CIFS)
, Mac (AFP) , and FTP . Protocols must be universally enabled before they are available for use.
By default, they are all enabled. To enable or disable any protocol system-wide for the NAS, use the
Protocol menu.
4. Click the Apply button to create the Home Share Disk.