User Manual

249
Product Manual WebPAM PROe - System Conguration
piNgiNg a host or serVer oN the isCsi Network
This function enables you to ping other network nodes through any one of the Vess R2600’s iSCSI ports.
To ping a host or server on the network:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Ping tab.
4. TypetheIPaddressofthehostorserverintotheIPAddresseld.
5. Choose the port Type from the drop-down menu.
• iSCSImeansaniSCSIport
• MgmtmeanstheVessR2600’svirtualmanagementport
6. IfyouchoseiSCSIport,choosetheRAIDcontrollerandportnumberfromthedrop-downmenus.
7. Type the number of packets you want to send in the Number of Packets to Pingeld.
Four packets are commonly used for a ping.
8. Click the Start button.
Inafewmoments,theresultdisplaysunderthe Device tab as Ping succeeded or Ping failed .