User Manual

241
Product Manual WebPAM PROe - System Conguration
addiNg isCsi truNks
Important
The member ports on a controller in an iSCSI trunk must be the
same type and speed. The same rule applies at the other end of the
connection,theportsmustbeuniformintypeandspeed.
Vess R2600 supports a maximum of eight trunks. iSCSI ports that are aggregated into a trunk must be of the
same speed.
YoucannotuseaniSCSIportthathasportalsconguredtoit.See “Viewing a List of iSCSI Portals” on page
234
and “Deleting iSCSI Portals” on page 237 .
To add an iSCSI trunk:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Trunk tab.
4. Click the Create Trun k button.
5. Make your choices as required:
• Trunk Type –Choosethetrunkingmethod,LACP orBalance XOR
• Controller ID
–IDoftheRAIDcontroller,1or2
• Master Port number–IDofthemasterport
• Slave Port number–IDstheslaveports
6. Click the Submit button.
The new trunk is added to the list.
Specify the trunk when your create a portal.