User Manual

239
Product Manual WebPAM PROe - System Conguration
ViewiNg isCsi port iNForMatioN
To view information about a port:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Port tab.
4. Clicktheportyouwant,thenclickthe View button.
Port information includes:
• Controller ID–IDoftheRAIDcontrollerwheretheportislocated
• Status–Enabledordisabled
• Jumbo Frames–Enabledordisabled*
• Link Status–Upordown,activeorinactive
• MAC Address–MACaddressofthetargetport
• Maximum Supported Speed–Maximumspeedsupported(1Gb/sor10Gb/s)
• Current Speed–Currentoractualspeedofthetargetport
• Relative Portals–Theportalscorrespondingtothistargetport
Items marked with an asterisk (*) are adjustable under "Making iSCSI Port Settings"
MakiNg isCsi port settiNgs
To make iSCSI port settings:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Port tab.
4. Clicktheportyouwant,thenclickthe Settings button.
5. Make settings changes as required:
• Jumbo Frames–Checktoenablejumboframesupportonthisport.Unchecktodisable.
6. Click the Submit button.