User Manual

237
Product Manual WebPAM PROe - System Conguration
MakiNg isCsi portal settiNgs
To make iSCSI portal settings:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
4. Clicktheportalyouwant,thenclickthe Settings button.
5. Make settings changes as needed:
• IfyouhaveaTrunkassociation,chooseaTrunkID(1to8)fromthedrop-downmenu.
• TypetheIPaddressoftheportalintheeldprovided.
• Typethesubnetmaskoftheportalintheeldprovided.
• IfyouhaveaVLANassociation,enteraVLANtag(1to4094)intheeldprovided.
• FromtheIPTypedrop-downmenu,chooseIPv4orIPv6.
DHCPiscurrentlysupportedonlyforIPv4.
6. Click the Submit button.
deletiNg isCsi portals
To delete an iSCSI portal:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
4. Clicktheportalyouwant,thenclickthe Delete button.
5. In the Conrmationbox,typetheword“ conrm ”intheeldprovidedandclickthe Conrm
button.
The portal is removed from the list.