User Manual

236
Vess R2000 Series Product Manual Promise Technologies
addiNg isCsi portals
Vess R2600 supports up to 32 iSCSI portals. Each iSCSI portal can belong to a different VLAN for a maximum
of 32 VLANs.
If you plan to associate the newportal witha trunk, create thetrunk rst. See “Adding iSCSI Trunks” on
page 113.
To add a portal:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
4. Click the Create Portal button.
5. Make your choices and inputs as required:
• ChooseanAssociationtypefromtheoptionlist.
ThechoicesarePHY or Trunk,
•
IfyouarecreatingaPHYassociation,choose
• Controller ID(1or2)fromthedrop-downmenu.
• ChooseaPort IDfromthedrop-downmenu.
• IfyouwanttouseVLAN,click enable VLAN andllaVLANtagfrom(1to4094).
• IfyouarecreatingaTrunkassociation,chooseaTrunk
ID(1to8)fromthedrop-downmenu.
• TypetheIPaddressoftheportalintheeldprovided.
• Typethesubnetmaskoftheportalintheeldprovided.
• TypethegatewayIPaddressoftheportalintheeldprovided.
• FromtheIPTypedrop-downmenu,chooseIPv4orIPv6.
DHCPiscurrentlysupportedonlyforIPv4.
6. Click the Submit button.
The new portal is added to the list.