User Manual

234
Vess R2000 Series Product Manual Promise Technologies
MakiNg isCsi target settiNgs
To make target settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Target tab.
4. Clickthetargetyouwant,thenclickthe Settings button.
5. Make settings changes are required:
• Alias
• Enable Header Digest
• Enable Data Digest
• Enable Uni-directional CHAP Authentication
• Enable Bi-directional CHAP Authentication
• Enable NOP-In
6. Click the Submit button.
ViewiNg a list oF isCsi portals
To view a list of iSCSI portals:
1. Click the Device tab.
2. Click the IO Network Management icon.
3. Click the Portal tab.
Portal information includes:
• ID–Portalnumber.Startsat0.
• IP Address–IPaddressoftheportal.
• Controller ID–RAIDcontrollerID,1or2.
• Port ID–PhysicalportontheRAIDcontroller.
• Trunk ID–TrunkID,1to8.Referstoportalsassociatedwithatrunk(link
aggregation).N/Ameansthisportalisnotassociatedwithatrunk.
• VLAN Tag–VLANTag,1to4094.ReferstoportalsassociatedwithaVirtualLocal
AreaNetwork(VLAN).N/AmeansthisportalisnotassociatedwithaVLAN.