User Manual

233
Product Manual WebPAM PROe - System Conguration
Target information includes:
• ID–IDnumberofthetarget.
• Name–iSCSIqualiedname(iqn)ofthistarget.
• Alias–Maximumof32characters.Useletters,numbers,space
betweenwords,andunderscore.Analiasisoptional.*
• Status–Upordown.
• Error Recovery Level–Errorrecoverylevelsupported.
• Initial R2T–Allowsinitiatortobeginsendingdatatoatarget
withoutreceivingareadytotransfercommand.
• Max Outstanding R2T–MaximumnumberofR2TPDUsthe
targetcanhaveoutstandingforasingleiSCSIcommand.
• Max Burst Length–Maximumlengthofasoliciteddatasequenceinbytes.
• Data Digest –Addsadatadigest(CRC).*
• Header Digest–Enablestheuseofheaderdigest(CRC).*
• Data Sequence in Order–Enablesplacementofdatainsequenceorder
• Data PTU in Order –EnablesplacementofdatainPDUorder
• Default Time to Wait–Afteradroppedconnection,thenumber
ofsecondstowaitbeforeattemptingtoreconnect
• Default Time to Retain–Numberofsecondsaftertimetowait
(above)beforereassigningoutstandingcommands
• Uni-directional CHAP Authentication–Uni-directional(peer)
CHAPauthentication,enabledordisabled*
• Bi-directional CHAP Authentication–Bi-directional(local)
CHAPauthentication,enabledordisabled*
• Maximum Connections–Themaximumnumberofconcurrentconnections
• Immediate Data–Enablestheinitiatortosendunsolicited
datawiththeiSCSIcommandPDU.
• First Burst Length–Inbytes.
• Assigned Portal IDs
• NOP-In -
CheckiSCSIconnectionstatus*
Items marked with an asterisk (*) are adjustable under "Making iSCSI Target Settings"