User Manual

223
Product Manual WebPAM PROe - System Conguration
addiNg a luN Map
ForFCsystemsoriSCSIsystems,youcansetupanInitiatorLUNmap.
A maximum of 256 logical drives can be mapped to an FC initiator or an iSCSI initiator.
ToassignaLUNtoaninitiator,addtheinitiatorrst.See“Adding an FC Initiator” on page 219 or “Adding an
iSCSI Initiator” on page 221.
LUN masking must be enabled in order to map a LUN. See “Enabling and Disabling LUN Masking” on page
225.
To add a LUN map:
1. Click the Storage tab.
2. Click the LUN Mapping & Masking icon.
3. Beside Active LUNMappingType,
• FCsubsystems,choosetheInitiatoroption.
• iSCSIsubsystems,choosetheInitiatoroption.
IfyouchangetheLUNMappingType,inthepopupmessagetype“ conrm ” and click the Conrm
button.
4. Click the LUN Mapping button.
TherstLUNMappingscreenappears.
Thisscreenletsyouchooseinitiators,ports,ortargets,dependingontheActiveLUNMappingType.
5. Clickthedrop-downmenutochoosetheinitiators,ports,ortargetsyouwantfortheLUNmap.
Chooseyourinitiators,ports,ortargetsindividuallyorchooseallofthem.
6. Click the Next button.
The second LUN Mapping screen appears.