User Manual

219
Product Manual WebPAM PROe - System Conguration
addiNg aN FC iNitiator
You must add an initiator to the Vess R2600’s initiator list in order to map your LUN or logical drive to the
initiator.
MethOd 1: inPutting the initiAtOr nAMe
This action requires Administrator or Super User privileges.
To add a Fibre Channel initiator to the list:
1. Click the Storage tab.
2. Click the Initiator icon.
3. Click the Add Initiator button.
4. Inputtheinitiatornameintheeldsprovided.
AnFCinitiatornameistheWorldWidePortNameoftheinitiator,composedofaseriesofeight,two-digit
hexadecimal numbers.
5. Click the Submit button.
The initiator is added.
MethOd 2: Adding frOM A list
This action requires Administrator or Super User privileges.
To add a Fibre Channel initiator to the list:
1. Click the Device tab.
2. Click the Fibre Channel Management icon.
3. Click the Logged In Device tab.
4. Check the box next to the initiator you want to add.
5. Click the Add to Initiator List button.
Theinitiatorisadded,anditscheckboxgraysout.