User Manual

Table Of Contents
217
Product Manual WebPAM PROe - System Conguration
ruNNiNg a traNsitioN oN a spare driVe
Transition is the process of replacing a revertible spare drive that is currently part of a disk array with an
unconguredphysicaldriveoranon-revertiblespare.Youmustspecifyanunconguredphysicaldriveofthe
same or larger capacity and same media type as the revertible spare drive.
See “Transition” on page 581.
running A trAnsitiOn
To run a transition on a revertible spare drive:
1. Click the Administration tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Transition and click the Start button.
4. From the Source Physical Drivedrop-downmenu,chooseaSourcediskarrayandtherevertiblespare
drive.
Arrays have an ID No. The revertible spare has a Seq. No. (sequence number).
5. From the Target Physical Drive drop-downmenu,chooseaTargetuncongureddrive.
6. Click the Conrm button.
stOPPing, PAusing Or resuMing A trAnsitiOn
Tostop,pauseorresumeTransition:
1. Click the Administration tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Transition and click the Stop,Pause,orResume button.