User Manual

211
Product Manual WebPAM PROe - System Conguration
To create a LUN clone of a logical drive:
1. Click the Storage tab.
2. Click the Logical Drive icon.
The Logical Drive list appears.
3. Clickthelogicaldriveyouwant,thenclicktheLUN Clone to DA button to clone the LUN to a Disk Array
or LUN Clone to LD button to clone the LUN to a Logical Drive.
4. Make settings as required:
• ForLUN Clone to DA checkavailableDiskArrayinthelistasthe
targetDiskArray,ChooseaRAIDlevelforthecopyoftheLD,then
chooseOnline orOfine forthetypeofcloningprocess.
• ForLUN Clone to LD checkavailableLogicalDrivesinthelistforthetarget
LD,andchooseOnline orOfine forthetypeofcloningprocess.
• ForOnline CloneenteratimeinminutesforMirror Write End Time.
Upto8clonesofaLUNcanbecreatedatatimeifthereareenoughDiskArraysorLDs
available.
5. Click the Next button and review your choices.
6. Click the Start button to begin the cloning process. You need to Conrm the Lun Clone start in a pop-up
menu.
The cloning progress bar displays.
Note the Target Logical Drive ID. Use this number to identify the LUN clone in the Logical Drive list.
IfyouchosearedundantRAIDlevel,theLUNcloneisautomaticallysynchronizedaftercreation.
AftertheLUNcloneiscreated,youcanmanageitlikeanyotherlogicaldrive.See“Making Logical Drive
Settings” on page 204
,“Locating a Logical Drive” on page 205,and“Deleting a Logical Drive” on page
203.
ForuserstoaccesstheLUNclone,youmustmapittoaninitiator.See“Managing LUNs” on page 222.