User Manual

209
Product Manual WebPAM PROe - System Conguration
MigrAting A lOgicAl drive
To migrate a logical drive:
1. Click the Administration tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Migrate and click the Start button.
4. In the Select Disk Arraydrop-downmenu,choosethesourcediskarray.
5. In the Select Physical Drives diagram,clickthedrivestoaddthemtoyourarray.
TheIDnumbersofthechosendrivesappearintheeldbelowthediagram.
6. Click the Next button.
7. Check the box next to the logical drive you want to modify.
8. Fromthedrop-downmenu,chooseatargetRAIDlevel.
The choice of RAID levels depends the number of physical drives in the disk array. See the Note below.
9. In the Capacityeld,acceptthecurrentcapacity.
Or check the Expand CapacityboxandenteragreatercapacityandsizeinMB,GBorTB.
Ifthereiscapacityremaining,youcancreateanadditionallogicaldrive.
10. Click the Next button.
ThelogicaldriveIDnumbers,withtheoriginalandtargetRAIDlevelsandcapacitiesareshown
11. Toaccepttheproposedtargetvalues,clicktheConrm button.
Note
WhenyouaddphysicaldrivestoaRAID10array,itbecomesaRAID1E
arraybydefault.
If you are adding an even number of physical drives to a RAID 10 array and
youwantthetargetarraytobeRAID10,youmustspecifyRAID10under
RAID level.