User Manual

196
Vess R2000 Series Product Manual Promise Technologies
PerfOrMing A MAnuAl rebuild
To perform a manual rebuild:
1. Click the Administration tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Rebuild and click the Start button.
4. FromtheSourcePhysicalDrivedrop-downmenu,chooseaSourcediskarrayandphysicaldrive.
Arrays have an ID No. Physical drives have a Seq. No. (sequence number)
5. FromtheTargetPhysicalDrivedrop-downmenu,chooseaTargetphysicaldrive.
6. Click the Conrm button.
When the disk array is rebuilding:
• Thediskarrayshowsagreencheck iconandRebuildingstatus.
• Logicaldrivesunderthediskarraycontinuetoshowayellow! iconandCriticalstatus.
stOPPing, PAusing Or resuMing A rebuild
Tostop,pauseorresumeaRebuild:
1. Click the Administration tab.
2. Click the Background Activities icon.
The list of background appears.
3. Mouse-over Rebuild and click the Stop,Pause,orResume button.