User Manual

192
Vess R2000 Series Product Manual Promise Technologies
MakiNg disk array settiNgs
To make disk array settings:
1. Click the Storage tab.
2. Click the Disk Array icon.
The list of disk arrays appears.
3. Clickthediskarrayyouwant,thenclicktheSettings button.
4. Make settings changes as required:
• Enter,changeordeletethealiasintheAliaseld
Maximumof32characters;letters,numbers,spacebetweencharacters,andunderline.
• Media Patrol–Checktoenable,unchecktodisableonthisarray.
• PDM–Checktoenable,unchecktodisableonthisarray.
• Power Management–Checktoenable,unchecktodisableonthisarray.
5. Click the Save button.
Notes
You can also enable or disable Media Patrol for the entire RAID
system. See “Making Media Patrol Settings” on page 149.
HDD Power Saving must be enabled on the RAID controller for the
Power Management settings to be effective. See “Making Controller
Settings” on page 113.
Power Management functions are limited to the features your HDDs
actually support.