User Manual

181
Product Manual WebPAM PROe - System Conguration
• ReadCache–Enabledordisabled
• ReadCacheSupport–YesorNo
• WriteCache–Enabledordisabled
• WriteCacheSupport–YesorNo
• EnableReadLookAhead
Support–YesorNo
• ReadLookAheadCache–
Enabledordisabled
• CommandQueuing–Enabledordisabled
• CommandQueuingSupport–YesorNo
• WWN–WorldWideName
• Port1NegotiatedPhysicalDriveSpeed
• Port1SASAddress
• Port2NegotiatedPhysical
DriveSpeed
• Port2SASAddress
• DriveTemperatureinºC
• DriveReferenceTemperatureinºC
• PowerSavingLevel–
Enabledordisabled
• MediumErrorThreshold
• SASSATABridgeFirmwareVersion
• SASSATABridgeBootLoaderVersion
MakiNg iNdiVidual physiCal driVe settiNgs
To make individual physical drive settings:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Clickthephysicaldriveyouwant,thenclicktheSettings button.
4. On the Settings tab:
• Enter,change,ordeletethealiasintheAliaseld.
5. On the SMART Log Settings tab:
• ChecktheboxtoenabletheSMARTlog.
6. Click the Save button.