User Manual

179
Product Manual WebPAM PROe - System Conguration
• Model-ModelofPROMISEsystem
• PhysicalDriveID–IDnumber
ofthephysicaldrive
• Location–Enclosurenumber
andslotnumber
• Alias–Ifassigned
• PhysicalCapacity–TotalcapacityinGB
• CongurableCapacity–
UsablecapacityinGB
• UsedCapacity–Capacity
actuallyusedinGB
• BlockSize–Typically512Bytes
• OperationalStatus–OKis
normal,Stale,PFA,Dead
• Conguration–Arraynumberand
sequencenumber,sparenumber,
Model–Makeandmodelofthedrive
• DriveInterface–SATA1.5Gb/sor
3Gb/s,SAS3Gb/sor6Gb/s
• SerialNumber–Serialnumberofthedrive
• FirmwareVersion–Firmware
versiononthedrive
• ProtocolVersion–ATA/ATAPI
orSCSIprotocolversion
• VisibleTo–Controllersthatcan
accessthisphysicaldrive
• WriteCache–Enabledordisabled
• ReadLookAheadCache–
Enabledordisabled
• ReadCacheSupport–YesorNo
• SMARTFeatureSet–YesorNo
• SMARTSelfTest–YesorNo
• SMARTErrorLogging–YesorNo
• CommandQueuingSupport
–TCQorNCQ
• CommandQueuing–Enabledordisabled
• QueueDepth-Numberofcommands
• MaximumMultipleDMAModeSupported
• MaximumUltraDMAModeSupported
• DMAMode
• PowerSavingLevel–
Enabledordisabled
• APMSupport–StandbyorActive
• MediumErrorThreshold
• DriveTemperature
• DriveReferenceTemperature
3. Clickthephysicaldriveyouwant,thenclicktheView button.
Physical drive information includes:
Advanced information for SATA physical drives includes: